Getting ready to start recording, Inserting/ejecting a memory card (not supplied) – Samsung HMX-E10ON-XAA User Manual
Page 37
To insert a memory card
1. Pull the battery cover in the direction of
the arrow as shown in the fi gure to open.
2. Insert the memory card into the card slot
until it softly clicks.
Make sure that the terminal portion
is facing down and the camcorder is
placed as shown in the fi gure.
3. Close the battery cover.
•
To eject a memory card
1. Pull the battery cover in the direction of
the arrow as shown in the fi gure to open.
2. Gently push the memory card to eject it.
3. Close the battery cover.
INSERTING/EJECTING A MEMORY CARD (NOT SUPPLIED)
To avoid the data loss, turn off the camcorder by pressing the Power (
) button before inserting
or ejecting the memory card.
Be careful not to push the memory card too hard. The memory card may suddenly pop out.
•
•
Your camcorder supports only micro SD (micro Secure Digital) and micro SDHC (micro Secure Digital
High Capacity) cards. The compatibility with the camcorder may vary depending on the manufacturer
and the type of memory card.
¬page 28
getting ready to start recording
27
1
2