Samsung HMX-E10ON-XAA - Manual (Page 28)

PRECHECK!
Be sure to charge the battery before you start using your camcorder.
You can charge the camcorder’s battery with the built-in USB plug of the camcorder or the USB charger (not
supplied). •
•
Charging the battery
You can charge the camcorder with the USB charger (not supplied).
Do not push the Built-in USB plug forcibly.
This camcorder has a built-in USB plug which pops out at the press of a single button.
Depending on your computer environment, you can attach an external USB cable (not supplied) to
the camcorder’s USB plug and your computer’s USB port to charge the camcorder.
The camcorder will be charging if its built-in USB plug is connected to a PC even when it is turned on. •
•
•
•
•
getting started
1. Press the Power ( ) button to turn off the camcorder.
2. Open the Jack cover and press the [USB eject] button to pop out the built-in USB plug.
3. Connect the built-in USB plug of the camcorder to the USB port of a PC.
The charging (CHG) indicator lights up and charging starts. After the battery is fully
charged, the charging (CHG) indicator turns green.
¬page 19
4. When the charging is completed, detach the USB plug from the computer, and then push in
the built-in USB plug while pressing the [USB eject] button.
•
18
MENU
MODE
2
MODE
3
MODE
2