Samsung DVD-VR325-XAC - Manual (Page 62)

62 - English
R
ecording
While a recording is in progress, you can watch a differ-
ent channel, watch a different media, or add recording
time in 30-minute increments.
1 Watch a Different Channel
When you watching through the Antenna input dur-
ing recording, press the TV/VCR button on the
remote control. Change the channel you want to
watch.
- When you watching through AV input during
recording, change the input of your TV from AV
to Antenna.
Change the channel you want to watch.
2 Watch a different media during record-
ing
You can watch a DVD during VCR recording or
watch a Video tape during DVD recording.
• During VCR recording, insert a DVD in the DVD
deck. The output will automatically change to the
DVD and start playback.
• During DVD recording, insert a Video tape in the
VCR deck. The output will automatically change
to the VCR and start playback. (Only if tape is
missing the safety tab)
3 Add Recording Time
Refer to the One-Touch Recording (OTR).
(See page 57)
4 Recording DVD and VCR at the same
time
You can record DVD and VCR at the same time,
but both modes must be set up to record
separately.
• Press the DVD/VCR button to set the unit to DVD
or VCR mode.
• Choose AV input mode (CH, AV1, AV2 or DV). for
DVD or VCR.
• Choose REC mode for DVD or VCR.
• Press REC button for DVD or VCR.
Special Recording
Features When DVD Recorder & VCR is connected to
your TV using S-Video or component video
cable, the playback screen on the video tape
will not display during DVD recording.
You cannot record different channels at the
same time.
The DVD and VCR cannot start recording at
the exact same time. You must set one mode to
start recording, then the other.
Note