Samsung DVD-VR325-XAC - Manual (Page 52)

Each time you record a cassette on this DVD Recorder
& VCR, an “index” is automatically marked on the tape
when recording starts.The Search function allows you to
fast-forward or rewind to a specific index and start play-
back from that point. Depending on the direction select-
ed, the indexes are numbered as follows
• This DVD Recorder & VCR uses a standard indexing
system (VISS). As a result, it will recognize any index-
es marked by other VCRs using the same system and
vice versa.
❚
Go To [0:00:00] Stop
Use this feature when you want to search for the
0:00:00 counter position on a cassette.
1 Press the CLEAR button at the point on the tape
where you want to set the counter to 0:00:00.
2 While a cassette is stopped, press the ANYKEY
button.
3 Press the …† buttons to select Go To Zero, then
press the ENTER button.
The VCR will rewind or fast forward, searching for
the 0:00:00 counter position, and then automatical-
ly stop at that position.
❚
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
52 - English
P
layback
Variable Search
System
1 While a cassette is stopped, press the ANYKEY
button.
2 Press the …† buttons to select End Search, then
press the ENTER button.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that posi-
tion. If the VCR reaches the end of the tape during
end search, the tape will be ejected.
❚
Forward/Reverse Intro Scan
Use scan and play when you don’t know exactly
where a program is located on a cassette tape.
1 While a cassette is stopped, press the ANYKEY
button.
2 Press the …† buttons to select Forward Intro
Scan or Reverse Intro Scan, then press the
ENTER button. When an Index mark is found, the
DVD Recorder & VCR will playback the tape for 5
seconds, after which it will continue searching for
the next Index mark.
Go To Zero
œœ
0 : 00 : 03
End Search
√√
0 : 00 : 03
Scan and Play
√√
0 : 00 : 23
SELECT MOVE
VCR
Go To Zero
End Search
Forward Intro Scan
Reverse Intro Scan
SELECT MOVE
VCR
Go To Zero
End Search
Forward Intro Scan
Reverse Intro Scan
SELECT MOVE
VCR
Go To Zero
End Search
Forward Intro Scan
Reverse Intro Scan