Samsung DVD-VR325-XAC - Manual (Page 27)

English - 27
S
ystem Setup
Channel Add/Delete
4 Press the …† buttons to select Channel
Add/Delete, then press the ENTER or √ button.
5 Press the …† or number buttons to select the
channels you want to add or delete on the Select
channel screen. Then, press the ENTER button.
• Using …† buttons for channel selection allows
the user to add/delete one channel at a time.
• Using CH/TRK ( / ) buttons for channel
selection jumps to the next channel memorized
in Auto Channel Memory.
6 Press the œ √ buttons to select Add or Delete,
then press the ENTER button.
No Disc Channel Add/Delete
NUMBER SELECT RETURN EXIT
Setup
Timer Rec.
Select channel : 1
Delete Add
No Disc Channel Add/Delete
NUMBER SELECT RETURN EXIT
Setup
Timer Rec.
Select channel : 11
Channel is added.
Delete Add
4 Press the …† buttons to select Auto Channel
Memory, then press the ENTER or √ button.
• The DVD Recorder & VCR will automatically
search for all available channels in the selected
tuner band. This procedure may take a few min-
utes to complete.
• When finished, the lowest channel found will be
displayed.
• Press ENTER button to stop or cancel scan-
ning.
No Disc Auto Channel Memory
MOVE SELECT RETURN EXIT
Setup
Timer Rec.
Total channel numbers: 06/125
Saved channel : 05
5%
Scanning...
Stop
Use this feature if Auto Channel Memory missed a chan-
nel that you would like to add and delete a channel you
wish to remove.
1 With the unit in Stop mode/No Disc mode, press
the MENU button.
2 Press the …† buttons to select Setup, then press
the ENTER or √ button.
3 Press the …† buttons to select Channel Set, then
press the ENTER or √ button.
When you connect the DVD Recorder & VCR to TV with
RF Antenna Cable, follow the steps below to set the RF
Output Channel.
1 With the unit in Stop mode/No Disc mode, press
the MENU button.
2 Press the …† buttons to select Setup, then press
the ENTER or √ button.
No Disc Channel Set
Antenna/Cable TV : Cable TV √ √
Auto Channel Memory √ √
Channel Add/Delete √ √
RF Output Channel : CH3 √ √
MOVE SELECT RETURN EXIT
Setup
Timer Rec.
RF Output Channel