Samsung DVD-VR325-XAC - Manual (Page 38)

38 - English
P
layback
Playing a Disc
This DVD Recorder & VCR can only operate
with discs that are compatible with DVD-RAM
Standard Version 2.0.
Playback and/or recording may not work for
some types of discs, or when specific opera-
tions, such as angle change and aspect ratio
adjustment, are being performed. Information
about the discs is written in detail on the box.
Please refer to this if necessary.
Do not allow the disc to become dirty or
scratched, fingerprints, dirt, dust, scratches or
deposits of cigarette smoke on the recording
surface may make it impossible to use the disc
for recording.
DVD-RAM/-RW/-R discs may not be able to
play on some DVD players, depending on the
player, disc and the condition of the recording.
Discs with PAL programs recorded on them
cannot be recorded using this product.
Note
Do not move your DVD Recorder & VCR while
playing, as this may cause damage to the disc.
Make sure to press the OPEN/CLOSE button to
open or close the disc tray.
Do not push the disc tray while it is being
opened or closed, as this may cause a product
malfunction.
Do not place foreign materials on or in the disc
tray.
Some functions may perform differently or be
disabled depending on the disc type. If this
occurs, refer to the instructions written on the
disc case.
Be especially careful that children's fingers are
not caught between the disc tray and the tray
chassis when it closes.
After turning power on, it will take a few seconds
until the DVD Recorder & VCR operates.
CAUTION
1 Press the OPEN/CLOSE button.
2 Place a disc gently into the tray with the disc’s
label facing up.
3 Press OPEN/CLOSE button to close the disc tray.
• Your DVD Recorder & VCR closes the disc
tray and plays the disc automatically.
• The recorder does not play discs automatically
after the initial power on.
• When the recorder is powered on and a disc is in
the tray, the unit will be activated and wait in stop
status.
• Press the PLAY button to start playback.
• If you insert an MP3 Disc, your DVD Recorder &
VCR will display the file list on the screen and
start playing.
• If you insert a JPEG Disc, folders and a file list
are displayed.
• If you want the unit to play automatically when it
is powered on with a disc in the unit, power on
with the PLAY button.
4 Press the STOP button to stop playback.
When you stop disc play, the DVD Recorder &
VCR remembers where you stopped. When you
press PLAY button again, it will pick up where
you left off. (unless the disc is removed or the
DVD Recorder & VCR is unplugged, or if you
press the STOP button twice.) This function is
only applicable to DVD-VIDEO, DVD-RAM/
-RW/-R or Audio CDs (CD-DA).
Note