Samsung SCH-A950WRVXAR - Manual (Page 42)

42
Sect
ion 3
VoiceSignal Commands
The following is a list of functions that you can perform
using VoiceSignal speech recognition on your phone.
• Call : Dial by saying a Name in your Contacts
list or a Name and a Location (home, work, mobile).
• Call : Dial by saying the number you want.
• Send Text: Send a text message to a number or to
someone in your Contacts List.
• Lookup : Open the contact record for any name in
your Contacts list.
• Go to
• Check : Provides details of your coverage, signal
strength, and battery level.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in
your Contacts list. See page 63 for information on creating
a Contacts list.
1. Press and hold for two seconds.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the earpiece.
3. Say “Call” at a distance of 3-12 inches from the phone in
a natural voice.
4. “Say the Name or Number” plays through the earpiece or
speakerphone--if it is enabled.
5. To use Name Dialing, say the name of the contact that
you want to dial.