Dv ieee 1394 usb a/v s-video mic, Advanced recording – Samsung SC-D107-XAP User Manual
Page 67
ENGLISH
63
63
Advanced Recording
Audio dubbing
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the camcorder.
■
When you wish to dub using the External A/V input, connect the
AUDIO/VIDEO cable to the camcorder by inserting the cable Jack in to the
camcorder.
-
Press the MENU button, turn the MENU DIAL to highlight A/V and press
the ENTER button.
-
Turn the MENU DIAL to highlight AV IN/OUT and press the ENTER
button to select AV IN.
2. Press the
(PLAY/STILL) button and find the time frame of the scene to
be dubbed.
3. Press the
(PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
■
A.DUB will be displayed on the LCD.
■
The camcorder is in a ready-to-dub state.
5. Press the
(PLAY/STILL) button to start dubbing.
■
Press the
(STOP) button to stop the dubbing.
Notes
■
You can not use the audio dubbing function while playing a write protected video tape.
■
When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio system from
which you wish to record.
■
You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
DV
IEEE
1394
USB
A/V
S-VIDEO
MIC
AV IN
Audio (R)
Audio (L)
DV
IEEE
1394
USB
A/V
S-VIDEO
MIC
00762B SCD107 SEA (60~107) 3/8/04 9:20 AM Page 63