Samsung SC-D107-XAP - Manual (Page 104)

Maintenance
✤ At the end of a recording you must remove the power source.
✤ When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery.
1. Slide the TAPE EJECT switch in the direction of the arrow.
■ Opening the cassette door ejects the tape automatically.
■ Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free
environment.
■ Dust and other foreign materials can cause square-shaped noise or jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
■ Press the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.
After finishing a recording
ENGLISH
100 100
1 2
3 4
00762B SCD107 SEA (60~107) 3/8/04 9:20 AM Page 100