Samsung LN37A450C1XZP User Manual

Page 31

English - 2

When Double (

) mode has been set in PIP, the Picture Size cannot

be set.
Temporary image retention may occur when viewing a static image on the set

for more than two hours.
After selecting “Zoom” mode: Select by pressing the ◄ or ► button.

Use the ▲ or ▼ button to move the picture up and down. After selecting ,

use the ▲ or ▼ button to magnify or reduce the picture size in the vertical

direction.
“Wide Zoom”: Move the screen up/down using the ▲ or ▼ button after selecting

the by pressing the ► or

ENtER button.

After selecting “Just Scan” in hDMI (00i) or Component (00i) mode:

Select by pressing the ◄ or ►button. Press the

ENtER button. Use the

▲, ▼, ◄ or ► button to move the picture. Press the

ENtER button.

Reset: Press the ◄ or ► button to select “Reset”, then press the ENtER

button. You can initialize the setting.
HD (High Definition)

16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Input Source

Picture Size

TV, AV, S-Video,Component (480i,480p)

16:9, Wide Zoom, Zoom, 4:3

Component(1080i), HDMI (1080i)

16:9, Wide Zoom, Zoom, 4:3, Just Scan

16:9, 4:3

Alternately, you can press the

P.SIZE button on the remote control repeatedly to

change the picture size.

6:
Sets the picture to 16:9 wide mode.

Wide Zoom
Magnify the size of the picture more

than 4:3.

Zoom
The screen size when Wide screen is

vertically enlarged.

4:3
Sets the picture to 4:3 normal mode.

Just Scan
Use the function to see the full

image without any cutoff when HDMI

(720p/1080i), Component (1080i)

signals are input.

➣

Move

Enter

Return

Wide Zoom

Zoom

4:3

Just Scan

Size

Reset

▲