Samsung HMX-U20LN-XAC - Manual (Page 86)

76
troubleshooting
Recording
Symptom Explanation/Solution
The recording stops automatically.
There is no more free space for recording on the storage media.
Back up important files on your PC and format the storage media
or delete unnecessary files.
If you use a memory card with a low writing speed, the camcorder
automatically stops recording videos and the corresponding
message appears on the LCD screen. •
•
When recording a subject
illuminated by bright light, vertical
lines appear.
The camcorder is unable to record these levels of brightness. •
When the screen is exposed to
direct sunlight during recording,
the screen turns red or black for an
instant.
Do not leave the camcorder with the LCD screen exposed to direct
sunlight. •
The beep sound is not heard.
Set the "Beep Sound" to "On." page 55
The beep sound is temporally off while recording videos.
When the Audio/Video cable is connected to the camcorder, the
beep sound automatically turns off. •
•
•
There is a time difference between
the point where you press
Recording start/stop (
) button
and the point where the recorded
video starts/stops.
On your camcorder, there may be a slight time delay between the
point when you press Recording start/stop (
) button and
the actual point where the recorded video starts/stops. This is not
an error.
•
You cannot record a photo
Set your camcorder to Record mode. page 20
Release the lock on the write-protection tab of the memory card if
set.
The storage media is full. Use a new memory card or format the
storage media. page 52
Or delete unnecessary images. page 46 •
•
•