Getting started, Using the battery, Inserting the battery – Samsung HMX-U20LN-XAC User Manual
Page 25: Ejecting the battery
Inserting the battery
1. Open the battery cover by sliding the
OPEN lever as shown in the figure.
2. Insert the battery into the battery slot until
it locks.
Make sure that the SAMSUNG logo is
facing up while the battery is placed as
shown in the figure.
3. Close the battery slot cover.
•
Ejecting the battery
1. Open the battery cover by sliding the
OPEN lever as shown in the figure.
2. Slide the Battery release switch and pull
out the battery.
3. Close the battery cover.
USING THE BATTERY
Purchase extra batteries to allow continuous use of your camcorder.
Use only Samsung-approved batteries. If you use batteries from other manufacturers, there is a
danger of overheating, fire or explosion.
Samsung is not responsible for problems caused by unapproved batteries.
•
•
getting started
15