Samsung HMX-U20LN-XAC - Manual (Page 68)

58
Default Set
You can initialize your camcorder settings to the factory defaults
(initial settings at the factory). Initializing the camcorder settings to
factory defaults does not affect recorded images.
1. Press the MENU button / button “Settings.”
2. Press the
/ button “Default Set” OK button.
3. Select “Yes” with the / /OK button.
Select “No” to cancel the Default Set.
All setting values are initialized to the factory default. •
•
After resetting the camcorder, reset the "Date/Time Set." page 23
Do not turn off the power while initializing the settings.
The "Default Set" function does not affect the files recorded on
the storage media. •
•
•
Language
You can select a language in which to display the menu and messages. page 24
Anynet+ (HDMI-CEC)
This camcorder supports Anynet+. It is an AV network system that enables you to control all
connected Samsung AV devices with an Anynet+ supported Samsung TV remote control.
1. Press the MENU button / button “Settings.”
2. Press the
/ button “Anynet+ (HDMI-CEC)” OK button.
3. Select the desired submenu item with the / button.
OK button.
4. Press the MENU button to exit the menu.
Submenu items
Off: Disables the function.
On: The Anynet+ function is enabled. •
•
When you turn on your camcorder and it is connected via an HDMI cable to a TV that supports
Anynet+, the camcorder’s Anynet+ (HDMI-CEC) function automatically turns on. If you do not want
to use the Anynet+ function, set “Anynet+ (HDMI-CEC)” to “Off.”
For details on the Anynet+ (HDMI-CEC) function, refer to the user manual of the Samsung TV with
Anynet+. •
•
system setting
4FMFDU Menu &YJU
4FUUJOHT
-BOHVBHF
57%JTQMBZ
%FGBVMU4FU
4FUUJOHT
"OZOFU )%.*$&$
%FGBVMU4FU
-BOHVBHF
4FMFDU Menu &YJU .PWF
0GG
0O