Samsung SPH-M500BKMEID - Manual (Page 74)

50 Section 2B: Controlling Your Phone’s Settings
Alert Notification
Your phone can alert you with an audible tone when you change service
areas, once a minute during a voice call, when the signal fades, when
powering your phone on or off, or when a call has been connected.
To enable or disable alert sounds:
1. Select Menu > Settings > Sounds > Alerts.
2. Select Minute Beep, Service, Connect, or Sig. Fade Tone and
press .
3. Select On or Off and press .
Silence All
There may be times when you need to silence your phone entirely. The
phone’s Silence All option allows you to mute all sounds without turning
your phone off.
To activate Silence All:
ᮣ With the phone open, press and hold the volume key down in
standby mode. (The screen will display “Silence All.”)
To deactivate Silence All:
ᮣ Press the volume key up repeatedly to select a desired volume level.
Note: If Power On or Power Off is selected, choose Off , Mystery , Crystal , or
Exciting and press OK
a500.book Page 50 Thursday, November 2, 2006 10:57 AM