Samsung SGH-D807ZKACIN User Manual

Page 111

Section 10: WAP

111

Select Settings. Highlight Connection Settings and press the Select soft

key or the

key.

Select the profile you want.

For each profile, the following options are available:

• Profile Name: enter a name that you wish to assign to the HTTP proxy server.
• Home URL: set the address of your startup homepage. When the default

homepage displays, you can delete it using the

key and enter your own

choice.

• Proxy: place a check in the box to use the proxy server.
• IP Address: enter the IP address of the proxy server.
• Port: enter a port number or use default setting.
• DNS

•

DNS1

: enter the primary DNS (Domain Name System) address.

•

DNS2

: enter the secondary DNS address.

• Bearer: select the bearer to be used for each type of network address accessed:

GPRS or GSM. The remaining options depend on the Bearer setting.

When the bearer is set to GPRS:

• APN: enter the access point name used for the address of the GPRS network

gateway.

• Login ID: enter the User ID required to connect to the GPRS network.
• Password: enter the password required to connect to the GPRS network.

When the bearer is set to GSM:

• Dial Number: enter the PPP server phone number
• Login ID: enter the PPP server login ID.
• Password: enter the PPP server password.
• Data Call Type: select a data call type: Analog or ISDN.

Note: The WAP settings may vary depending on the service provider.