Samsung SCX-6555N-XBG User Manual
Page 97
97
Paper Jam in tray 1
Paper misfed from
tray
Or paper has jammed
in the tray feed area.
Or the tray cover is
opened.
Clear the jam. (See "In
tray" on page 90 and
Paper Jam in tray 2
Paper Jam in tray 2
(HCF)
Paper Jam in tray 3
Paper Jam in tray 3
(HCF)
Paper Jam in tray 4
Paper jam inside
finisher’s duplex
Paper jammed in the
stacker.
Open the stacker door
and remove jammed
paper by lowering
guide 1a or 1b.
Paper Jam inside of
duplex path
Paper has jammed
during duplex printing.
Clear the jam. (See "In
Paper Jam inside of
machine
Paper has jammed in
the registration area.
Clear the jam. (See "In
Scanner locking
switch is locked or
another problem
occurred
The CCD (Charged
Couple Device) lock
has been locked. The
CCD does not detect
its home location or
move.
Unlock the CCD lock.
page96) Or turn off the
machine and on again.
Try again. If the
problem persists, call
for service.
Shake toner
cartridge
The toner supply is
low.
Thoroughly roll the new
cartridge five or six
times to distribute the
toner evenly inside the
cartridge.
Staple cartridge is
empty. Replace it
Stapler is run out.
Order Staple Cartridge.
page96) And replace it.
Staple cartridge is
not installed. Install
it in finisher
The staple cartridge is
not installed.
Install the staple
cartridge following the
steps explained on the
back of the finisher
continue the print job
and disregard of this
error message, go to
Admin Setting to
adjust the option. (See
MESSAGE
MEANING
SUGGESTED
SOLUTIONS
System error: [zzz].
Please turn off then
on
There is a problem in
the system operation.
Turn the machine off
and turn it on again. If
the problem persists,
please call for service.
This IP address
conflicts with an IP
address already in
use. Check it
The IP address is
used in other place
elsewhere.
Check the IP address
or obtain a new IP
address.
Toner cartridge is
not compatible.
Check user’s guide
The toner cartridge
you have installed is
not for your machine.
Install a Samsung-
genuine toner cartridge,
designed for your
machine.
Toner cartridge is
not installed. Install
it
The toner cartridge is
not installed or the
CRUM (Consumer
Replaceable Unit
Monitor) in the
cartridge is not
properly connected.
Try to reinstall the toner
cartridge.
Replace with new
toner cartridge
The toner cartridge is
at the end of its life.
When the toner
cartridge replacement
message appears on
the screen and if you
select Continue, this
message displays.
Rplace a toner
cartridge with a
Samsung-genuine
toner cartridge. (See "In
End of life, Replace
with new toner
cartridge
The lifespan of the
toner cartridge which
the arrow indicates is
reached.
This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace the
toner cartridge with a
Samsung-genuine
toner cartridge. (See "In
Prepare new toner
cartridge
The toner cartridge is
almost empty.
Ensure a replacement
cartridge is in stock.
Too much paper in
finisher stacker.
Remove printed
paper
The stacker is full of
printouts.
Remove printouts from
the stacker.
Too much paper in
output bin tray.
Remove printed
paper
The printed papers
are full on the output
tray.
Remove printed outs
from the output tray.
Use Auxiliary
Access
The credit is not
enough to access the
job according to
Foreign Device.
Insert credit into the
Foreign Device.
MESSAGE
MEANING
SUGGESTED
SOLUTIONS