Samsung SCX-6555N-XBG - Manual (Page 28)

28
Macintosh
Linux
INSTALLING THE SOFTWARE
You have to install the machine software for printing. The software includes
drivers, applications, and other user friendly programs.
1. Make sure that the network setup for your machine is completed. (See
"Setting up the network" on page 26.) All applications should be closed
on your computer before beginning installation.
2. Insert the Printer Software CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click Start > Run. Type
X:\Setup.exe, replacing “X” with the letter which represents your drive
and click OK.
If you use Windows , Windows 7 and Windows Server 2008 R2, click
Start > All Programs > Accessories > Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows , Windows 7 and Windows
Server 2008 R2, click Run Setup.exe in Install or run program field,
and click Continue in the User Account Control window.
3. Click Next.
• The window above may slightly differ, if you are reinstalling the
driver.
OPERATIN
G SYSTEM
REQUIREMENT (RECOMMENDED)
CUP RAM
FREE HDD
SPACE
Mac OS X
10.4 or lower
• PowerPC G4/
G5
• Intel
processors
• 128 MB for a
PowerPC based
MAC (512 MB)
• 512 MB for an
Intel based MAC
(1 GB)
1 GB
Mac OS X
10.5
• 867 MHz or
faster
PowerPC G4/
G5
• Intel
processors
512 MB (1 GB) 1 GB
Mac OS X
10.6
• Intel
processors
1 GB (2 GB) 1 GB
ITEM REQUIREMENTS
Operating system Red Hat 8 ~ 9
Fedora Core 1 ~ 4
Mandrake 9.2 ~ 10.1
SuSE 8.2 ~ 9.2
CPU Pentium IV 1 GHz or higher
RAM 256 MB or higher
free HDD space 1 GB or higher
Connection USB interface or Network interface
Software Linux Kernel 2.4 or higher
Glibc 2.2 or higher
CUPS
SANE
• It is necessary to claim swap partition of 300 MB or larger for
working with large scanned images.
• The Linux scanner driver supports the optical resolution at
maximum.
• The following procedure is for when the machine is being used as
a network machine. If you want to connect a machine with a USB
cable, refer to Software section.
• The following procedure is based on the Windows XP operating
system. The procedure and popup window which appears during
the installation may differ depending on the operating system, the
printer feature, or the interface in use. (See Software section.)