Samsung RF31FMEDBSR-AA - Manual (Page 15)

setting up _15
01 SETTING
UP
If the refrigerator is installed in an area with low
water pressure (below 20psi), you can install
a booster pump to compensate for the low
pressure.
After you have connected the water line, make
sure the water storage tank inside the refrigerator
is properly fi lled. To do this, press the water
dispenser lever until the water runs from the water
outlet.
Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper tubing
and ¼” compression nut.
Connecting to the water supply line
1. First, shut off the main water
supply.
2. Locate the nearest cold water drinking line and
install the pipe clamp and shut off valve.
3. Connect the water line installation kit to the
shut off valve.
Connecting the water supply line to
the refrigerator.
There are several items that you need to purchase
to complete this connection.
You may fi nd these items sold as a kit at your local
hardware store.
Use Copper Tubing Use Plastic Tubing
• ¼” copper tubing
• ¼” compression nut
(1pc)
• Ferrule (2pc)
• ¼” plastic tubing
→ Molded end(Bulb)
• ¼” compression nut
(1pc)
1. Connect the household water line to the
assembled compression fitting.
- If you are using copper tubing, slip the
compression nut ( B ) (not supplied) and
ferrule (not supplied) on the copper tubing (not
supplied) as shown.
- If you are using plastic tubing ( B ) , insert the
molded end (Bulb) of the plastic tubing ( B )
into the compression fitting.
Do not use without the molded end (Bulb)
of the plastic tubing ( B ).
2. Tighten the compression nut ( B ) onto the
compression fitting.
Do not over-tighten the compression nut ( B ) .
3. Turn the water on and check for any leakage.
If you find water drops or leakage in the
connection areas, turn off the main water
supply. Check the connections and, if
necessary, tighten.
4. Flush 1 gallon of water through the filter
CAUTION
Pipe clamp Pipe clamp
Cold water line Cold water line
Shut off valve Shut off valve
Shut off valve Shut off valve
Pipe clamp Pipe clamp
Cold water line Cold water line
Water line installation kit Water line installation kit
Compression Compression
Nut (1/4”) Nut (1/4”)
(Assembled) (Assembled)
Ferrule Ferrule
(Not supplied) (Not supplied)
Plastic Tubing Plastic Tubing
(Assembled)
(Assembled)
Compression Compression
Fitting
Fitting
(Assembled)
(Assembled)
Molded Molded
end(Bulb)
end(Bulb)
Compression Compression
nut (B) (1/4”)
nut (B) (1/4”)
(Not supplied)
(Not supplied)
or or
Copper tubing Copper tubing
(Not supplied)
(Not supplied)
Plastic tubing (B) Plastic tubing (B)
(Not supplied)
(Not supplied)
Household water supply line Household water supply line
Refrigerator
DA68-02894A-11.indb 15 DA68-02894A-11.indb 15 2014. 6. 23. 1:37 2014. 6. 23. 1:37