Samsung LB17KSBB - Manual (Page 10)

Unpacking
Front
Rear
Bottom
General
(The configuration at the back of the monitor may vary from product to product.)
1. Power port Connect the power cord for your monitor to the power port on the back of
the monitor.
2. Signal Cable Connect the signal cable to the video port on your computer, video board,
video card, or graphics card.
BNC Connectors (Option)
(The configuration at the back of the monitor may vary from product to product.)
1. Power port Connect the power cord for your monitor to the power port on the back of
the monitor.
2. Signal port Connect the signal cable to the 15-pin D-sub connector on the back of
your monitor.
3. BNC Connectors
(Option) Connect the signal cable to the BNC signal port on the back of your
monitor.
Note:
See
Connecting the Monitor for further information regarding cable connections.
793DF/797DF/997DF/793MB/795MB
SyncMaster 591S/793S/591V/793V/783DF/795DF
SyncMaster 997DF