Isp settings, Date & time – Axis Communications 2460 User Manual
Page 43

AXIS 2460 User’s Manual
System Options
43
If you enter your own string here and it proves incompatible with your connected modem,
click the Default button to reset the string to the default value.
Important!
ISP Settings
Provide the contact information used for connecting to your ISP.
Internet Service Provider -
Enter the service provider's name.
Phone Number -
This is the telephone number, including any regional code, to your ISP.
Country codes should also be provided if you are dialing internationally.
User Name -
ISP subscribers are provided with a unique user name and password. Enter
your user name here.
Password -
Enter the password associated with your user name.
Redial Attempts -
Define the number of dial-up attempts the Network DVR should make to
the host modem/ISP before timing-out; that is, before it stops trying to establish a modem
connection.
Redial Interval -
Defines how soon after an unsuccessful dial-up attempt the Recorder will
try again.
Date & Time
Click Date and Time to define the time and date settings for your AXIS 2460, either
manually or automatically, as described below.
Current Network DVR Time
Shows the current date and time.
New Network DVR Time
Synchronize with computer time -
Sets the time according to the clock on your computer.
If the communication settings are not displayed after clicking
Save, it is likely that the default initializa-
tion string used by the AXIS 2460 is incompatible with your modem. In this case, you must enter the cor-
rect initialization string for the connected modem and click
Save once again.