AT&T DEFINITY 555-230-223 - Manual (Page 84)

System Administration
Network Routing Information — Network
Routing Daemon
Network routing daemon state: ___
TCP/IP Administration
Network Routing Information
Network Routing Daemon
This line is used to provide abbreviated help on the currently selected field.
CANCEL REFRESH HELP STATE
Screen 3-10. Network Routing Daemon
This screen is used to view and change the state of the network routing daemon.
The
Network routing daemon state field is filled in when the screen first
appears.
Field Name Description
Network routing
daemon state Either on or off. When on, the network routing
daemon can automatically find routes to other
networks. Default=on.
Use this screen as follows:
If you don’t want to change the network routing daemon state, press
CANCEL to exit the screen.
If you want to change the network routing daemon state, press STATE to
change the state.
The following prompt appears: Are You Sure? (Y/N) . Type Y and
press Return . The screen reappears with the new state displayed.
Issue 1 January 1996 3-23