AT&T DEFINITY 555-230-223 - Manual (Page 165)

Index
N
Network Routing Daemon screen, 3-23
Network Routing Information (Main Menu) screen, 3-22
Network Routing Table screen, 3-27
Null modem, 2-10, 2-18
P
Parameters
default, 1-2
TCP/IP, 1-1
Password
changing default, 1-5
protection, 1-5
Passwords
choosing, 3-13
Ping Host screen, 2-36, 3-48
Port connectors, 1-5, 2-7
Port Status/Control screen, 3-49
Port usage, 2-18
Power
cycling, 1-5, 2-8
Procedures
bringing up the system, D-2
logging on, 3-2
solving terminal connection problems, D-3
Project Manager
responsibilities, 2-2
Protocol
supported, 1-6
R
Releases supported, 1-1
Removable media, 1-4
Removable Media Operations screen, 3-36
Requirements
installation, 2-1
slot, 2-2
Reset System screen, 3-40
Restrictions
slot and carrier, 2-8
RS-232
connectors, 2-18
RS-232 connection, 2-17
S
Safety considerations, 2-3
during installation, 2-1
SAT-PC, 2-17, See G3-MA
Screens
Add Client Link, 3-33
Add Host, 3-20
Add Logins, 3-11
Add Routes, 3-29
Brouter Administration, 3-31
Change Passwords, 3-13
Client Access Logs, 3-45
Command Logs, 3-47
Default Gateway, 3-25
DEFINITY LAN Gateway Reset Log, 3-46
Local Host Table, 3-18
Login Attempt Log, 3-44
Login/Password Administration, 3-9
Main Menu, 3-7
Maintenance (Main Menu), 3-35
Message Collection Period, 3-53
Network Routing Daemon, 3-23
Network Routing Information (Main Menu), 3-22
Network Routing Table, 3-27
Ping Host, 2-36, 3-48
Port Status/Control, 3-49
Removable Media Operations, 3-36
Reset System, 3-40
Security Logs, 3-43
Set System Time and Date, 3-37
System Logs, 3-42
TCP/IP Administration (Main Menu), 3-15
This Host, 2-33, 3-16
Security considerations, 1-5
Security Logs screen, 3-43
Set System Time and Date screen, 3-37
Setting system clock, 2-32,
See Setting system time and date
Shutdown procedure
when needed, 1-5, 2-7
Single Carrier Cabinet, 2-8
Site requirements
cable, 2-2
DEFINITY switch, 2-2
humidity, 2-3
LAN connection, 2-2
temperature, 2-2
workspace, 2-2
Site selection
verifying, 2-1
Slot
Alarm Board, 2-8
IN-3