AT&T DEFINITY 555-230-223 - Manual (Page 156)

Appendix F: Returning the Application to its Original State
7. Type 2 and press Return . The following prompt appears:
Enter Tape Device (0-6)(Default = 1)
8. Press Return . The following messages and menu appear:
MFB Board Diagnostics PASSED
Transferring To Software
Copyright (c) 1992 AT&T
All Rights Reserved
0: Exit
1: Initialize Disk
2: Modify Partition Map
3: Copy Generic Partitions
4: Additional Commands
Enter option:
9. Type 1 to initialize the disk.
The following screen appears:
Enter SCSI ID of Disk (default 0):
THIS WILL OVERWRITE THE DISK BOOT BLOCK,
AND CREATE A DEFAULT PARTITION MAP ON THE DISK.
ALL DATA ON THE DISK WILL BE LOST.
DO YOU WISH TO CONTINUE? [no]:
10. Type y and press Return . The previous menu reappears:
0: Exit
1: Initialize Disk
2: Modify Partition Map
3: Copy Generic Partitions
4: Additional Commands
Enter option: 3
F-2 Issue 1 January 1996