Samsung I80 - Manual (Page 117)

116 _SOFTWARE
Starting PC mode
If you connect the USB cable to a USB port on your PC and then turn on
the power, the camera will automatically switch to "computer connec-
tion mode". In this mode, you can download stored images to your PC
through the USB cable.
Ê Camera settings for connection
1. Turn on the camera
2. Connect the camera and computer with
the supplied USB cable.
3. Turn on the computer. The camera and
computer are connected.
4. External device selection menu will be
displayed on the LCD monitor.
5. Select the [Computer] by pressing the Up
/ Down button and press the OK button.
Select USB
Computer
Printer
Confirm OK
Ê Connecting the camera to a PC
Ê Disconnecting the camera and PC
Refer to page 118 (Removing the removable disk).
Ä If you selected [Printer] in Step 5, when you connect the camera to
your computer, the [Connecting Printer] message will display and the
connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure
from Step 2 onwards.