beautypg.com

Selecting focus type, Flash, Information – Samsung EC-NV7ZZBBA-US User Manual

Page 29

background image

Ś28ś

Selecting focus type

ƀ When the macro mode is selected, it is possible that camera shake will

occur. Take care not to shake the camera while taking a picture.

ƀ When you take a picture within 20cm in the Macro mode, select the FLASH

OFF mode.

INFORMATION

ƅ Manual Focus (MF)

Where the automatic focusing is not available, for example, in very dark
conditions, use the manual focus. Please be careful when using the manual
focus as the picture can be blurred easily.
You can use the manual focus in the program mode and ASM mode.

ƀ How to set the manual focus

To set to manual focus, touch the button and slide your finger to the left or
right.

1cm

40cm

80cm

1.5m

4.5m

MF

[Farther focus]

[Closer focus]

1cm

40cm

80cm

1.5m

4.5m

MF

Flash

ƅ You can select the flash type in accordance with the

subject distance.
The distance ranges are show below.

ƅ When using the ASR, Continuous shot, High Speed

Continuous shot, Motion Capture, AEB, Movie clip
mode and Still image mode (except the NIGHT,
PORTRAIT and CHILDREN mode), the flash will not
operate.

ż When Super macro is selected, the flash is automatically switched off.

Normal

W: 0.8 - 5.8

W: 0.2 - 0.8

W: 0.2 - 5.8

T: 2.0 - 4.0

T: 0.6 - 2.0

T: 0.6 - 4.0

Macro

Auto macro

ISO

AUTO

ƅ Flash range (W : Wide, T : Tele)

(Unit : m)

ƀ If you press the shutter button after selecting the Auto, Fill-in, Slow sychro

flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move the camera until the second flash fires.

ƀ Using the flash frequently will reduce the life of the battery.
ƀ Under normal operating conditions the charging time for the flash is usually

less than 5 seconds. If the battery is weak, the charging time will be longer.

ƀ Take photographs within the flash range.
ƀ The image quality is not guaranteed if the subject is too close or highly reflective.
ƀ When taking an image in poorly lit conditions with the flash, there may be a

white speck in the captured image. The speck is caused by the reflection of
the flash light from the atmospheric dust. It is not camera malfuction.

ƀ Do not open the Built-in flash by force. It may cause damage to the flash.

INFORMATION

7

AUTO

RED EYE

FILL IN

SLOW SYNC

OFF

This manual is related to the following products: