Samsung HMX-S15BN-XAA - Manual (Page 47)

37
BASIC CAMCORDER POSITIONING
Use both hands while taking a video or photo to prevent the camcorder from shaking.
Try to avoid any slight movement while shooting.
Aim the camcorder as shown in the illustration.
1. Hold the camcorder with your both hands.
2. Put your hand through the grip belt.
3. Make sure your footing is stable and there
is no danger of colliding with another
person or object.
4. Aim and focus as shown in the illustration.
We recommend you keep the sun behind
you while shooting.
Adjusting the shooting angle
ATTACHING THE FERRITE CORE
Attach the ferrite core to the cables. The ferrite core reduces interference.
1. To open the ferrite core, release the
stoppers on both ends of the ferrite
core.
2. Attach the ferrite core to the cable near
its connecter as shown in the figure.
3. Close the ferrite core until it clicks shut.
Take care not to damage the cable.
Stopper
Ferrite Core
Wind the cable so
that it is not slack.