Samsung EC-ST150FBPWPY - Manual (Page 67)

Changing the camera’s focus
Shooting options 66
• If you do not select a focus area, the focus frame will appear in the center of the
screen.
• Tracking a subject may fail when:
- the subject is too small
- the subject moves excessively
- the subject is backlit or you are shooting in a dark place
- colors or patterns on the subject and the background are the same
- the subject includes horizontal patterns, such as blinds
- the camera shakes excessively
• When tracking fails, the feature will be reset.
• If the camera fails to track the subject, you must reselect the subject to track.
• If the camera fails to focus, the focus frame will change to red and the focus will
be reset.
• If you use this function, you cannot set Face Detection options, Timer options,
Burst options, and Intelli zoom.
Using tracking auto focus
Tracking AF allows you to track and auto focus on your subject, even when you are
moving.
1
In Shooting mode, press [m].
2 Select Focus Area → Tracking AF.
3
Focus on the subject you want to track, and then press [o].
• A focus frame appears on the subject and follows the subject as you move
the camera.
• The white frame means that your camera is tracking the subject.
• When you half-press [Shutter], the green frame means that your subject is in
focus.
• The red frame means that your camera failed to focus.
4
Press [Shutter] to capture the photo.