Error messages – Samsung EC-ST150FBPWPY User Manual
Page 129
Appendixes
128
Error message
Suggested remedies
Card Error
•
Turn off your camera, and then turn it on again.
•
Remove your memory card, and then insert it again.
•
Format your memory card.
Card not supported.
The inserted memory card is not supported by your
camera. Insert a microSD, microSDHC, or microSDXC
memory card.
Connection failed.
•
The camera cannot connect to the network using the
selected access point. Select another AP and try again.
•
The camera has failed to connect to the other devices.
Try connecting again.
DCF Full Error
File names do not match the DCF standard. Transfer
the files from the memory card to your computer and
format the card. Then, open the Settings menu and
select General → File No. → Reset. (p. 125)
Device disconnected.
Network connection disconnected while transferring
photos. Reselect a device that supports AllShare Play.
File Error
Delete the damaged file or contact a service center.
Error message
Suggested remedies
File system not
supported.
Your camera does not support the FAT file structure of
the inserted memory card. Format the memory card on
the camera.
Initialization failed.
The camera has failed to locate a device that supports
AllShare Play. Turn on devices on the network that
support AllShare Play.
Invalid password.
The password for transferring files to another camera is
wrong. Enter the correct password again.
Low Battery
Insert a charged battery or recharge the battery.
Memory Full
Delete unnecessary files or insert a new memory card.
No Image File
Capture photos or insert a memory card that contains
some photos.
Photo transfer failed.
Network connection disconnected while transferring
photos. Try restarting the AllShare Play feature.
Transfer failed.
•
The camera has failed to send a photo to the other
devices. Try sending again.
•
The camera has failed to send an email or transfer a
photo to a device that supports AllShare Play. Check
the network connection and try again.
Error messages
When the following error messages appear, try these remedies.