Samsung ML-2540-XAA - Manual (Page 4)

Safety information_ 4
Caution
During an electrical storm or for a period of
non-operation, remove the power plug from the
electrical outlet.
►
This could result in electric shock or fire.
If the plug does not easily enter the electrical outlet, do not
attempt to force it in.
►
Call an electrician to change the electrical outlet, or this
could result in electric shock.
Be careful, the paper output area is hot.
► Burns could occur.
Do not allow pets to chew on the AC power, telephone or
PC interface cords.
► This could result in electric shock or fire and/or injury to
your pet.
If the machine has been dropped, or if the cabinet
appears damaged, unplug the machine from all
interface connections and request assistance from
qualified service personnel.
►
Otherwise, this could result in electric shock or
fire.
If the machine does not operate properly after these
instructions have been followed, unplug the machine from
all interface connections and request assistance from
qualified service personnel.
►
Otherwise, this could result in electric shock or fire.
Operating method
Caution
Do not forcefully pull the paper out during printing.
►
It can cause damage to the machine.
When printing large quantities, the bottom part of the paper
output area may get hot. Do not allow children to touch.
► Burns can occur.
Be careful not to put your hand between the
machine and paper tray.
► You may get injured.
When removing jammed paper, do not use tweezers or
sharp metal objects.
► It can damage the machine.
Do not block or push objects into the ventilation
opening.
►
This could result in elevated component
temperatures which can cause damage or fire.
Do not allow too many papers to stack up in the paper
output tray.
►
It can damage the machine.
Be care when replacing paper or removing jammed
paper.
► New paper has sharp edges and can cause
painful cuts.
This machine's power reception device is the power cord.
► To switch off the power supply, remove the power cord
from the electrical outlet.
Installation / Moving
Do not remove the plug by pulling on the cord; do
not handle the plug with wet hands.
► This could result in electric shock or fire.