Nilfisk-ALTO SMART Sweeper/Scrubber 692003 - Manual (Page 55)

AMERICAN-LINCOLN 1-55
SMART
SLIDE BROOM ONTO
BROOM IDLER
REMOVE BROOM LIFT ARM
MAINTENANCE
BROOM LIFT ARM
BROOM IDLER
BROOM IDLER
Fig. 84 Fig. 85
Fig. 86
Fig. 87
Remove broom lift arm as shown in figure 84 and 85. Remove the main broom from the from the broom idler
exposing the main broom compartment as shown in figure 86. Check and clean out the main broom
compartment before installing the new main broom. Slide the main broom onto the broom idler as shown in
figure 87. Replace the broom lift arm and rotate the broom lift arm knobs clockwise to tighten into place as
shown in figure 88. Adjust the main broom to 1-1/2” to 2” sweep pattern.
INSTALLED BROOM
Fig. 88