Asus Motherboard DSBF-DE/SAS - Manual (Page 50)

-0 Chapter 2: Hardware information
4. Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Spacebar). This feature requires
an ATX power supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
®
DSBF-DE Series Keyboard power setting
KBPWR1
(Default)
+5V +5VSB
3 2 2 1
5. Intel ® 6321ESB SATA port S/W RAID setting
(3-pin RAID_SEL1) (DSBF-DE model only)
This jumper allows you to select the Serial ATA RAID configuration utility to
use when you create disk arrays. Both utilities are supported by the
Intel ® 6321ESB. Place the jumper caps on pins 1-2 if you want to use the LSI
MegaRAID Serial ATA RAID utility (default); otherwise, place the jumper caps
on pins 2-3 to use the Intel ® Matrix Storage Manager (MSM).
®
DSBF-DE Series RAID setting
RAID_SEL1
1
2 2
3
Intel LSI
(Default)