Asus Motherboard DSBF-DE/SAS - Manual (Page 102)

4-32 Chapter 4: BIOS setup
Scroll down to display more items:
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Full fan speed will
be started when the
temperature reaches the
selected target value.
Hardware Monitor
CPU1 Domain 0 Target Temperature [075]
CPU1 Domain 1 Target Temperature [075]
CPU2 Domain 0 Target Temperature [075]
CPU2 Domain 1 Target Temperature [075]
SYSTEM1 Target Temperature [060ºC]
SYSTEM2 Target Temperature [060ºC]
FBD_FAN1 Speed N/A
VCORE0 Voltage 1.25 V
VCORE1 Voltage 1.25 V
VTT 1.21 V
+1.5V 1.56 V
+1.8V 1.79 V
+3V 3.28 V
+12V 11.91 V
+5V 4.87 V
+5VSB 4.96 V
VBAT 3.10 V
PhoenixBIOS Setup Utility
Advanced
The following screens appear when you install Intel ® 5100 and 5300 series
CPU.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
To select the fan speed
control model.
Hardware Monitor
CPU1 Temperature 39 o C/102 o F
CPU2 Temperature 29 o C/84 o F
SYSTEM1 Temperature 39 o C/102 o F
SYSTEM2 Temperature 29 o C/84 o F
CPU_FAN1 Speed 2925 RPM
CPU_FAN2 Speed N/A
FRN_FAN1 Speed N/A
FRN_FAN2 Speed N/A
FRN_FAN3 Speed N/A
FRN_FAN4 Speed N/A
REAR_FAN1 Speed N/A
REAR_FAN2 Speed N/A
Smart Fan Control [Smart Fan II]
CPU1 Target Temperature [66 o C]
CPU2 Target Temperature [66 o C]
PhoenixBIOS Setup Utility
Advanced