Chapter 2 – Asus Motherboard P7P55D User Manual
Page 58
2-38
Chapter 2: Hardware information
Chapter 2
11. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 600 W.
•
Do not forget to connect the 8-pin EATX12 V power plug. Otherwise, the system will
not boot.
•
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at
http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
•
If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power
or above to ensure the system stability.