Asus Motherboard P7P55D - Manual (Page 57)

ASUS P7P55D 2-37
Chapter 2
10. CPU, chassis, and power fan connectors
(4-pin CPU_FAN, 4-pin CHA_FAN1, 3-pin CHA_FAN2, 3-pin PWR_FAN)
The fan connectors support cooling fans of 350 mA~1000 mA (12 W max.) or a total
of 1 A~4 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, ensuring that the black wire of each cable matches the ground pin of the
connector.
®
P7P55D
CPU_FAN
PWR_FAN
Rotation
+12V GND
P7P55D Fan connectors
GND +12V Rotation
CHA_FAN2
A
D
B
C
B CHA_FAN1
GND
CHA FAN PWR
CHA FAN IN
+5V
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
C
A
D
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
• Only the CPU_FAN, CHA_FAN 1, and CHA_FAN 2 connectors support the FAN Xpert
feature.
• If you install two VGA cards, we recommend that you plug the rear chassis fan cable
to the motherboard connector labeled CHA_FAN1 or CHA_FAN2 for better thermal
environment.