Campbell Scientific Wireless Sensor Network (CWB100, CWS220, and CWS900) - Manual (Page 54)

Appendix A. Using DevConfig for CWS Setup
5. Once DevConfig connects to the sensor, enter the address of the CWB100
in the field called Base Station Address. If configuring a CWS900, choose
the type of measurement the sensor will make from the drop-down menu
called Measurement Configuration. If desired, change the Sensor Name
from its default value.
6. Click Apply to apply the changes. A configuration summary will be
displayed. Save the configuration information if desired. Click OK.
A-2