Campbell Scientific PWS100 Present Weather Sensor - Manual (Page 58)

Section 7. Operation
7.4.3 Top Menu Option 4 (Configuration)
Choosing option 4 from the SETUP menu brings up the CONFIGURATION
menu (see Figure 7-9). From this menu the basic configuration of the sensor is
set.
FIGURE 7-9. Configuration menu
Option 1 of the configuration menu gives the PWS100 ID menu (Figure 7-10).
Here a PWS100 ID can be set. This is effectively the station address which is
required on any communication with the PWS100. If the PWS100 is on a
network with more than one PWS100 then each station should have its own
PWS100 ID. The default PWS100 ID is zero.
7-22