Campbell Scientific PWS100 Present Weather Sensor - Manual (Page 41)

Section 7. Operation
Section 7.4.6 gives further details of how to set up the PWS100 with the
command set in the terminal mode (option 7 from the SETUP menu).
FIGURE 7-1. PWS100 setup menu
7.4.1 Top Menu Options 0, 1 and 2 (Message n)
The options 0, 1 and 2 from the SETUP menu are entitled ‘message 0’,
‘message 1’ and ‘message 2’. These are used to setup the message outputs for
messages with ID 0, 1 and 2. Selecting one of these brings up the MESSAGE
menu as shown in Figure 7-2. Each message allows the user to select message
intervals, modes and fields (option 1).
FIGURE 7-2. Message menu
7-5