Campbell Scientific Raven110 GPRS/EDGE Digital Cellular Modem User Manual

Page 31

Text mode
Original mode

Appendix C. Configuring the Raven for PPP

Datalogger Settings:

Using the Device Configuration Utility, configure the following setting on the
TCP/IP tab:

• Config Port Used = RS232

• IP Address = 0.0.0.0

• Modem Dial String = PPP

• Modem Dial Response = CONNECT

• User Name and Password are blank

Using the Device Configuration Utility, select the “Net Services” tab. The
“PakBus/TCP Service Port” default is 6785. This is the “Port” number that
will follow the “IP address” for LoggerNet to communicate with the
datalogger.

C-3