Campbell Scientific Raven110 GPRS/EDGE Digital Cellular Modem - Manual (Page 24)

Appendix A. Wireless Ace Setup without Template File
• S23 – Configure Serial Port – The baud rate needs to be configured to
match a valid datalogger baud rate. For a CR10X: 9600,8N1 and for a
CR1000: 115200,8N1.
• \Q – Serial Port Flow Control – This should be set to None.
• V – AT Verbose Mode – Set this to Numeric.
• &D – DTR Mode – Set to Ignore DTR
• S211 – DTR Mode – Set to Ignore DTR
A-2