Campbell Scientific PConnect Software for Palm™ OS PDAs - Manual (Page 27)

PConnect for the Palm Handheld
derived from the file when viewing the data. To transfer an FSL file to the
Palm, place the file in the C:\Campbellsci\PConnect\palmname directory and
the file will be copied during the next HotSync operation.
A data file can be deleted from the Palm device by pressing the Delete button.
You will be asked to confirm the deletion. A data file that has been deleted
will not be transferred when the Palm device is HotSync'd with the computer,
and it cannot be restored once deleted.
4.4 Viewing Files
To see the datalogger program files stored on the Palm handheld, touch the
word Stations in the upper right corner of the Stations window and select
Files.
By default, the file type displayed in this window is *.DLD (Edlog program
file). You can also see other files stored on the PDA, including CR1000,
CR800/850, or CR3000 program files (*.CR1, *.CR8, or *.CR3), CR200 files
(*.BIN), voice modem files (voice.txt), and datalogger operating system files
(*.OBJ), by touching the File Type name and selecting the file type filter from
the list.
Program files can be opened for viewing by selecting the file name and then
touching View. Voice Files and Operating System files cannot be opened for
viewing. All file types can be renamed or deleted by touching the
corresponding word (Delete or Rename).
CR200 Series datalogger program files (*.BIN) are binary files
and cannot be viewed. NOTE
21