A.14 gps settings, A.15 gps power, A.16 coordinate format – Campbell Scientific HS2 and HS2P (HydroSense II) User Manual

Page 42: A.14, A.15, A.16, Appendix a.14, gps, Settings, A-6), Appendix a.14, gps settings

Appendix A. Configuration Menus

A.14 GPS Settings

This submenu contains a list of settings related to the GPS. Using the

buttons, highlight one of the options shown and press

to select that item.

Alternatively, press

to exit the menu.

A.15 GPS Power

This menu controls power to the GPS module. Switching off GPS will save

power while the unit is awake and increase battery life; however, the time and

date used by the HydroSense II may be less accurate and any stored data will

not be geotagged for future display and charting. Using the

buttons,

select a power state to use, and press

. To exit the menu without saving,

press

A.16 Coordinate Format

Latitude and longitude information can be displayed on the

(p. 14) in one of three formats:

DDD.DDDD°

decimal degrees

DDD°MM.MMMM’

degrees with decimal minutes

DDD°MM’SS”

degrees, minutes and seconds.

Using the

buttons, select a format, and press

. To exit the menu

without saving, press

A-6