beautypg.com

2 removing display from hs2p pole, Removing display from hs2p pole, Tion 11.2 – Campbell Scientific HS2 and HS2P (HydroSense II) User Manual

Page 31

background image

HS2 and HS2P

7. Carefully replace the back cover of the display and replace the four

screws.

8. Turn over the display and hold the

button for 3 seconds to activate.

9. If using the HS2P, reinstall the display onto the pole.

11.2 Removing Display from HS2P Pole

1. Disconnect the sensor cable at the bottom of the display.

2. Squeeze the clip to release the display from its holder.

23