Campbell Scientific HS2 and HS2P (HydroSense II) - Manual (Page 22)

HS2 and HS2P
7.1 Buttons
User Interface Buttons
Button
Function
Power/MENU — To turn the HydroSense II on or off, press and
hold this button for 3 seconds. When pressed for less than 3
seconds in the main screen (p. 14), the main menu (p. A-1) will be
displayed.
READ/OK — Triggers a new measurement in the main screen
(p. 14). Also used to select an item in a list or to answer “OK” to
prompts.
Back/STORE — From the main screen (p. 14), used to store the
current reading to flash memory. In the menu system, used to
move “Back” to the previous menu.
Up — Moves the cursor up.
Down — Moves the cursor down.
Left — Moves the cursor to the left.
Right — Moves the cursor to the right.
7.2 Splash Screen
To turn the HydroSense II on, press and hold for 3 seconds. The
following splash screen is displayed.
The operating system version number and device serial number are displayed.
The splash screen is shown for 2.5 seconds.
7.3 Main Screen
After the splash screen, the main screen is shown. The main screen contains a
number of different elements which are explained in the following subsections.
14