Campbell Scientific CMP6-L, CMP11-L, and CMP21-L Pyranometers - Manual (Page 30)

CMP6-L, CMP11-L, and CMP21-L Pyranometers
7: Set Active Storage Area (P80)
1: 1 Final Storage Area 1
2: 101 Array ID
8: Real Time (P77)
1: 1220 Year,Day,Hour/Minute (midnight = 2400)
9: Average (P71)
1: 1 Reps
2: 3 Loc [ Solar_Wm2 ]
10: If time is (P92)
1: 0 Minutes (Seconds --) into a
2: 1440 Interval (same units as above)
3: 10 Set Output Flag High (Flag 0)
11: Set Active Storage Area (P80)
1: 1 Final Storage Area 1
2: 102 Array ID
12: Real Time (P77)
1: 1220 Year,Day,Hour/Minute (midnight = 2400)
13: Resolution (P78)
1: 1 High Resolution
14: Totalize (P72)
1: 1 Reps
2: 4 Loc [ Solar_MJ ]
15: Resolution (P78)
1: 0
Low Resolution
8. Maintenance
At regular intervals, physically inspect the pyranometer to ensure that:
• Dome is free of dirt, condensation, and ice (see Section 8.1, Cleaning
Domes).
• Desiccant granules are orange and opaque (see Section 8.2, Changing the
Desiccant).
• Mounting is secure.
• Pyranometer is level (if mounted horizontally).
• Cables are in good condition.
22