Campbell Scientific CM106B Tripod - Manual (Page 29)

CM106B Tripod
6.2.4 CM225 and 18098 Pyranometer Mounting Stand
The CM225 is used to attach a pyranometer or quantum sensor to a horizontal
pipe (1.0-in. to 2.1-in. OD) or vertical pole (1.0-in. to 2.1-in. OD).
The LI200X pyranometer and LI190SB quantum sensor mount to the CM225
via the LI200S leveling base (see FIGURE 6-16). The CS300 pyranometer
mounts to the CM225 via the 18356 leveling base. The CMP3 and LP02
pyranometers include their own bubble level and leveling screws allowing
them to mount directly to the CM225.
The 18098 provides a larger surface for mounting a user-supplied Eppley
pyranometer.
FIGURE 6-16. CM225 Pyranometer Mounting Stand
CM225
CM225
LI2003S
LI200X Pyranometer
21