12. enclosure with the –lm bracket – Campbell Scientific CM106B Tripod User Manual
Page 25
CM106B Tripod
Route the 14 AWG wire from the ground lug on the bottom side of the
enclosure to the ground lug on the base of the tripod (FIGURE 6-8). Strip 1/2
in. of insulation from each end of the wire. Insert wire ends into the ground
lugs and tighten.
FIGURE 6-12. Enclosure with the –LM bracket
Enclosure Tab
Lock Washers
U-Bolt
Nuts
U-Bolt Bracket
Hook
Enclosure Tab
17