Samlex America MSK-135 User Manual
Page 15
14 | SAMLEX AMERICA INC.
SAMLEX AMERICA INC. | 15
SectIOn 4 |
troubleshooting & Maintenance
LeD “LoAD” (5G, FiG 3.2) iS ReD AnD FLASHinG
•
output to Load Terminals is shut down due to overload in the load. Manual reset
will be required by pressing the Setting button. Load will be connected after 3 sec
•
output to the Load Terminals is shut down due to short circuit in the load. When
first short circuit occurs, the output to the Load Terminals is auto resets after 10 sec.
If second short circuit occurs, the output is shut down till it is manually reset 3 sec
after pressing the Setting button
MAintenAnce
Dust & dirt should be swept off the solar module surface using a soft brush then using
a wet cloth to wipe the panel surface to remove remaining dirt & grime. It is recom-
mended that any bird droppings should be removed as soon as possible as it can cause
damage to the surface.