Samlex America MSK-135 - Manual (Page 13)

12 | SAMLEX AMERICA INC. SAMLEX AMERICA INC. | 13
SectIOn 3 | Installation & Operation
Module(s) are exposed to sunlight and battery has not been connected
- No LeD indication
Module(s) are exposed to sunlight, battery is connected and then removed.
- "PV" LeD (5b, fig. 2.3):
Steady GreeN
- “batt” LeD (5C, fig 3.2): Steady GreeN with reD flickering
Setting Battery type
After connecting the battery, set the Lead Acid battery Type being used - flooded,
Sealed AGM (displayed and referred to as “Sealed”) or Sealed Gel Cell (displayed and
referred to as “Gel’). Use Setting button (5H, fig 3.2). Press the Setting button for more
than 5 seconds, the original battery type indicator will be flashing. Then press the Set-
ting button to choose Sealed, Gel, and flooded battery type. The setting finishes when
flashing stops. Status LeD corresponding to the battery type selected will be lighted (5D,
5e & 5f, fig 3.2).