2-2-5. to query status command, Format：stus, Illustration：don’t need to add any of parameter – Samlex America SA-1500 User Manual

Page 25: B0” uvp ( lsb ), B1” ovp, B2” olp ( loading > 110% ), B3” flp ( loading > 100% / 3min ), B4” otp, B5” batt too low, B6” batt too high

Text mode
Original mode

8-2-2-5. To query status command

Format

：STUS?

Illustration

：Don’t need to add any of parameter.

To respond the result be hexadecimal code replaced by 2

ASCll codes that is between 00 ~ FF (0~255), then convert

the Hex code to the binary digit after obtaining 8 bytes digit
that can be one of following

：

“B0” UVP ( LSB )
“B1” OVP
“B2” OLP ( Loading > 110% )
“B3” FLP ( Loading > 100% / 3min )
“B4” OTP
“B5” BATT Too Low
“B6” BATT Too High
“B7” BATT Too High ( MSB)