LBL Lighting Twilight 20 Chandelier - Manual (Page 5)

5
L
S
L
L
L
L
S
S
S
Install the Fixture Arms for 12 Light
Insert the arm of a long socket assembly into one of the
bottom hub holes and tighten the M3 set screw with the
provided 1.5 MM Allen wrench.
Feed the stripped portion of the long socket assembly wire
into the provided metal sleeve, and into the nearest "L" port
onto the canopy. Tighten the M4 set screw with the 2 MM
Allen wrench.
Repeat steps 1 & 2 for the remaining eight long socket
assembly wires.
Repeat steps 1 through 3, using the short socket assembly wire
top hub and the "S" posts on the canopy.
M4 SET
SCREW
2MM ALLEN
WRENCH
METAL
SLEEVE
L = Long Socket Assembly Wire
S = Short Socket Assembly Wire
CANOPY
WIRE
ASSEMBLY
WIRE
ASSEMBLY
“L" POST
HUB
ARM
NOTE: This section is for the 12 light version only.
5
L
L
L
4A
1
2
3
4
4
3
4
2
2